Ab dem 01.01.2023 wurde die Mehrwertsteuer für den Bau von PV-Anlagen bis 30 kW auf 0% gesenkt.
If you order from outside of Germany, please send us an email request.
Victron inverter MultiPlus 48/3000/35-16
Victron Inverter MultiPlus 48/3000/35-16
MultiPlus – a Combination of Inverter and Charger
Manufacturer’s Description:Two AC Outputs
The main output ensures uninterrupted operation. In the event of a grid failure or a disconnection of the shore/generator power, the MultiPlus takes over the supply to the connected loads. The switch-over occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed.
The second output only provides power when AC is available at one of the MultiPlus inputs. Loads that must not discharge the battery, such as a water heater, can be connected to this output (a second output is available on models with a rated power of 3 kVA or more).
Virtually Unlimited Power via Parallel Operation
Up to six MultiPlus units can be connected in parallel for high power demand. For example, six 24/5000/120 units can deliver 25kW/30kVA output power with 720 A charging capacity.
Three-Phase Operation
In addition to parallel connection, three units of the same model can be configured for a three-phase output. But that’s not all: up to six sets of three units can be connected in parallel to achieve a massive 75 kW / 90 kVA inverter output and over 2,000 A charging capacity.
PowerControl – Working with Limited Generator or Shore Power
The MultiPlus is a very powerful battery charger. As a result, it draws a significant amount of current from the generator or shore power (almost 10A per 5kVA Multi at 230 VAC). Using the Multi Control panel, the maximum current drawn from the grid or generator can be set. The MultiPlus then takes other connected AC loads into account and only uses the remaining available power for charging. This prevents overloading the generator or shore power connection.
PowerAssist – “Power Boost” for Generators and Shore Support
This feature takes the PowerControl principle to a new level. It allows the MultiPlus to support undersized alternative sources. Load peaks often occur for only a short period. In such cases, the MultiPlus ensures that insufficient shore or generator power is immediately supplemented by energy from the battery. When the load decreases, i.e., when some loads are switched off, the newly available energy can be used to recharge the batteries.
Solar Power: AC Output Even During Grid Failure
The Quattro can be used in both off-grid and grid-tied PV systems, as well as in other alternative energy systems. Software is available to detect grid failure.
System Configuration
- If settings on a single unit need to be changed, this can be done within minutes using a DIP switch configuration procedure.
- Parallel and three-phase systems can be configured using the VE.Bus Quick Configure and VE.Bus System Configurator software.
- Off-grid, grid-tied, and self-consumption systems, where Grid-Tie inverters and/or MPPT solar chargers are used, can be configured using the respective system assistants (software included with the systems).
Local Monitoring and Control
Multiple options are available: Battery Monitors, Multi Control Panel, VE.Net Blue Power Panel, Color Control Panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).
Remote Monitoring and Control / Remote Maintenance
Victron Ethernet Remote, Victron Global Remote, and the Color Control Panel. Data can be stored and viewed for free on our VRM (Victron Remote Management) website.
Remote Configuration / Remote Maintenance
If systems with a Color Control Panel are connected to Ethernet, they can be accessed and settings can be changed remotely.
For more information, please visit the home page for this product.