Main page » Charger » Mppt-Charger » Solar Charge Controller Victron BlueSolar MPPT 150/85 12/24/36/48V, 85Ampere
Ab dem 01.01.2023 wurde die Mehrwertsteuer für den Bau von PV-Anlagen bis 30 kW auf 0% gesenkt.
If you order from outside of Germany, please send us an email request.
Solar Charge Controller Victron BlueSolar MPPT 150/85 12/24/36/48V, 85Ampere
Manufacturer Description:
PV Voltage up to 150 V
The BlueSolar MPPT 150/70 and 150/85 charge controllers charge a battery with a lower nominal voltage from a PV array with a higher nominal voltage. The controller automatically adjusts to 12, 24, 36, or 48 V battery voltage.
Ultra-Fast Maximum Power Point Tracking (MPPT)
Especially under cloudy conditions, when light intensity changes constantly, an extremely fast MPPT controller increases energy yield by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection under Partial Shading
Partial shading can create two or more maximum power points (MPPs) on the current-voltage curve. Conventional MPPTs tend to lock onto a local MPP, which may not be optimal. The innovative BlueSolar algorithm always maximizes energy yield by tracking the optimal MPP.
Excellent Efficiency
Maximum efficiency over 98%. Full output current up to 40°C (104°F).
Flexible Charging Algorithms
Various pre-programmed algorithms and one fully programmable algorithm. Manual or automatic equalization. Battery temperature sensor and optional battery voltage sensor.
Programmable Auxiliary Relay
Can trigger an alarm or start a generator.
Comprehensive Electronic Protection
Over-temperature protection and load reduction at high temperatures. Protection against PV short-circuit and reverse polarity. Reverse current protection.
A technical datasheet and user manual can be sent via email upon request.
PV Voltage up to 150 V
The BlueSolar MPPT 150/70 and 150/85 charge controllers charge a battery with a lower nominal voltage from a PV array with a higher nominal voltage. The controller automatically adjusts to 12, 24, 36, or 48 V battery voltage.
Ultra-Fast Maximum Power Point Tracking (MPPT)
Especially under cloudy conditions, when light intensity changes constantly, an extremely fast MPPT controller increases energy yield by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection under Partial Shading
Partial shading can create two or more maximum power points (MPPs) on the current-voltage curve. Conventional MPPTs tend to lock onto a local MPP, which may not be optimal. The innovative BlueSolar algorithm always maximizes energy yield by tracking the optimal MPP.
Excellent Efficiency
Maximum efficiency over 98%. Full output current up to 40°C (104°F).
Flexible Charging Algorithms
Various pre-programmed algorithms and one fully programmable algorithm. Manual or automatic equalization. Battery temperature sensor and optional battery voltage sensor.
Programmable Auxiliary Relay
Can trigger an alarm or start a generator.
Comprehensive Electronic Protection
Over-temperature protection and load reduction at high temperatures. Protection against PV short-circuit and reverse polarity. Reverse current protection.
| BlueSolar Charge Controller | MPPT 150/85 |
| Battery Voltage | 12/24/36/48 V Auto-select |
| Max Battery Current | 85 A |
| Max PV Power (12 V / 24 V) | 1200 W / 2400 W |
| Max PV Power (36 V / 48 V) | 3600 W / 4850 W |
| Max PV Open Circuit Voltage | 145 V |
| Max Efficiency | 98% |
| Self Consumption | 10 mA |
| Absorption Voltage | Standard: 14.4 V / 28.8 V |
| Float Voltage | Standard: 13.8 V / 27.6 V |
| Charging Algorithm | Multi-stage adaptive |
| Temperature Compensation | -16 mV/°C / -32 mV/°C |
| Protection | Battery reverse polarity (fuse), output short-circuit, over-temperature |
| Operating Temperature | -30 to +60°C (full rated output up to 40°C) |
| Humidity | 95% non-condensing |
| Data Connection | VE.Direct (see Victron website for detailed information) |
| Power Terminals | 35 mm² / AWG 2 |
| Protection Class | IP43 (electronics), IP22 (connections) |
| Weight | 4.2 kg |
| Dimensions (H x W x D) | 350 x 160 x 135 mm |
A technical datasheet and user manual can be sent via email upon request.